This is to bring to the notice of all that we have an opening for the position of a Mechanical Engineer - Rotating Equipment Condition Monitoring Specialist. Qualified candidates should have the following:BSC, HND or equivalent in Mechanical Engineering or a related discipline with a Minimum of second class upper division.Minimum of 5 years post-graduation experience working on Rotation Equipment, out of which 3 years shall be gained in oil and gas facility operations.A good knowledge of Microsoft Project and Office SuitesFluent in English Language and Oral proficiency. Principal ResponsibilitiesMonitor the lube oil and seal oil systems on the process compressors and other rotating equipment for correct operation to confirm the integrity and safe operation of machines. Measure seal oil flows and consumption rates. Take oil and coolant samples for analysis.Carry out all necessary safety critical functions as identified, assigned and defined in the bowties to ensure that the effectiveness of the control barriers and recovery measures are maintained.Collect and analyzed vibration, noise, baroscopic data and other operating parameters on assigned area of the plant. Report abnormal equipment condition e.g. fluid leaks, loose bolts, low fluids levels etc. to ensure safe and effective operation.Ensure equipment is monitored according to the agreed interval and condition monitoring philosophy to verify the integrity of machines and reduce life cycle costs.Witness / Assist field and workshop test run of rotating equipment after repairs or overhauls. During disassembly / assembly of equipment in workshop, assist in Inspection, analyze failure pattern and provide recommendations to ensure quality control and quality assurance.Implement spare pump running policy, to verify their integrity spare pumps and prevent failure on demand which could be costly and disruptive to plant operation.Assist with machine fault and failure investigations to prevent repeat failure and to lower life cost of equipment initiate PACER work requests to repair defective equipment.Maintain the offline condition monitoring databases for the nominated area of plant. Ensure adequate alarm levels have been set in conjunction with the Area Rotating equipment engineers.Provide machine condition report for assigned area.